Paint Color Mixing Calculator: What Colors Make This Color?
Paints I have (untick any you don't own)
Pick any colour, paste a hex code or tap a popular colour above, and the paint color mixing calculator tells you which paints to mix and in what ratio. Every recipe is given in simple parts (for example 3 parts white, 1 part blue), using the tubes most painters already own. Untick the paints you don't have and the recipes change to suit your palette.
How to use the paint mixing calculator
- Choose your target colour. Use the colour picker, type a hex code such as #008080, or tap one of the popular colours.
- Tell it what paints you own. Open "Paints I have" and untick anything that isn't on your palette. The "primaries + black + white" button shows what you can mix from a basic five-tube set.
- Read the recipe. The best match comes first, with two alternatives. Each one shows the parts, the percentage of each paint and a preview of the mixed colour next to your target.
- Mix a small test. Measure the parts with a palette knife, spoon or dropper, mix well and dab a swatch on scrap paper. Let it dry before you judge it.
- Adjust by eye. If the swatch is too light, add a little more of the darkest colour. If it is too strong, add white in small steps.
Each result has its own link (the hex code is added to the address bar), so you can bookmark a recipe or share it with a friend.
Why this calculator mixes like real paint
Most online colour mixers simply average red, green and blue light values. That works for screens, but not for paint. Average a blue and a yellow on a screen and you get grey. Mix the same blue and yellow paint and you get green.
Paint is subtractive: each pigment absorbs some wavelengths of light and reflects the rest. When you mix two paints, the colour you see is the light that both pigments still reflect. This calculator models that with the Kubelka-Munk theory, the same principle paint manufacturers use for colour matching. It works across 16 bands of the visible spectrum, not just three RGB numbers, which is why its greens, purples and browns look like real mixes.
It also accounts for tinting strength. A pea-sized dot of Phthalo Blue or Mars Black can overpower a whole puddle of white, while Yellow Ochre or Cadmium Orange are much gentler. That is why some recipes ask for 20 or more parts of white to one part of a strong colour.
The paints the calculator uses
The recipes use 14 common artist acrylic colours, which are also standard in oils and gouache:
- Whites and blacks: Titanium White, Mars Black
- Reds and pinks: Cadmium Red Medium, Quinacridone Magenta
- Yellows and oranges: Cadmium Yellow Medium, Lemon Yellow, Cadmium Orange
- Blues, greens and purples: Ultramarine Blue, Phthalo Blue, Phthalo Green, Dioxazine Purple
- Earth colours: Yellow Ochre, Burnt Sienna, Burnt Umber
If you use craft paint, choose the closest match from your bottles. For example, a "primary blue" craft paint usually behaves like Phthalo Blue, and "true red" behaves like Cadmium Red. You can also learn the basics in our color mixing chart: what two colors make.
Tips for getting an exact match
- Start with the lightest paint. Put the white or lightest colour down first and add the darker colours a little at a time. It takes far less dark paint to shift a light colour than the other way round.
- Measure the parts the same way. One "part" can be a drop, a scoop or a teaspoon. Just use the same measure for every paint in the recipe.
- Remember acrylic dries darker. Wet acrylic looks lighter because the binder is milky. Always judge a dried swatch.
- Brands differ. Two "Ultramarine Blue" tubes from different brands can vary in strength and shade. Treat every recipe as a starting point and fine-tune by eye.
- Mix more than you need. Re-mixing an exact colour halfway through a painting is hard, so mix about 20% extra and store it in an airtight pot.
- Screens are not paint. Very bright, neon or glowing screen colours can't be reached with ordinary pigments. When the calculator says "nearest possible", that is as close as these paints can get. A fluorescent paint will take you the rest of the way.
Popular colour recipes
These are the colours people ask about most. Tap them in the calculator above, or read the full step-by-step guides with photos, videos and fixes for common mistakes:
- Shades of teal: teal is blue and green with a touch of white. Try Ultramarine Blue, Phthalo Green and Titanium White.
- Shades of brown: mix all three primaries, or start from Burnt Umber and Burnt Sienna.
- Shades of olive green: yellow with a little blue or black.
- Shades of blue: from pale sky blue (lots of white) to deep navy (blue plus a touch of purple or brown).
- Pastel colours: any colour plus plenty of white, usually 10 to 40 parts white to 1 part colour.
Frequently asked questions
What two colours make the colour I want?
Enter the colour above and the best match will show you. Many colours can be mixed from two paints, but some need a third to darken, dull or lighten them. Secondary colours are the classic two-paint mixes: yellow and blue make green, red and yellow make orange, and red and blue make purple.
Is the mixing calculator accurate?
The calculator uses a pigment-based (Kubelka-Munk) model, so the recipes behave like real paint rather than screen colours. Most targets match within a few percent. Paint brands, pigment strength, lighting and drying all change the final colour slightly, so always test a small swatch and adjust.
Can I use it for acrylic, oil and watercolour?
Yes. The pigments are the same across acrylic, oil and gouache, so the ratios carry over. For watercolour, use water to lighten instead of white: replace the Titanium White parts with more water and a thinner wash.
Why can't I mix a bright neon colour?
Mixing paint always loses some brightness, because every pigment you add absorbs more light. Colours brighter than your brightest tube, such as neon green or electric pink, can't be mixed. You need a fluorescent paint for those.
How do I make a colour lighter or darker without changing it?
To lighten, add white a little at a time (this is called a tint). To darken, add a darker colour of the same family or its complementary colour. Adding black darkens quickly but can make colours look dull or greenish, especially yellows.
Can I convert a hex code to a paint recipe?
Yes. Paste any hex code (for example #B57EDC) into the box and press "Find my paint recipe". You can also copy a hex code from a design app or website and turn it into a paint mixing recipe the same way.